How the AntiFlame Active Alarm system operates.

When triggered, The AntiFlame Active Alarm system sounds its internal audible siren and immediately shuts down your properties power and energy supplies (gas, electricity, heating oil, LPG) cutting off and isolating them at source. This happens the instant the siren sounds.

Cutting off those supplies removes the fuel energy from any ensuing fire. Isolation of the supplies removes personal doubt and risk, leaving a property safe to enter.

In many cases the incident will be contained to a smouldering phase without breaking into flames, causing widespread fire.
e.g: Chip pan fryer left unattended and overheats, alarm detects smoke, cuts power, chip pan cools before igniting - fire averted CLICK HERE
e.g: Iron left on clothing, cloth smoulders, alarm activates, cuts power, heat subsides from iron - fire averted
There are countless situations where AntiFlame Active Alarm reduces the risk of fire hazard. Jammed toaster, unattended curling tongs, shorts in wiring, faulty electric blankets, overloaded power sockets - just a few causes of domestic fires.

Common causes of accidental fires:
40% Cooking appliances
40% Smokers materials
10% Electrical appliances
10% Other
AntiFlame has the potential to limit and inhibit the danger of fire taking hold in a multitude of domestic and commercial situations - CLICK HERE

At AntiFlame Active Alarm we believe regulators will appreciate the benefits to life and property and will incorporate AntiFlame Active Alarm as a regulatory imperative into building standards.

At AntiFlame Active Alarm we feel insurers are likely to appreciate the reduced fire risk and containing quality of AntiFlame and may seek to encourage adoption through reduced premiums to new customers who have the system installed or make installation a condition of insurance, before or after an event.

We believe the Emergency Services will fully support its safety and protection qualities for personnel attending an incident and the property concerned.